How to Fix a Running Toilet

24 Hours 7 Days a Week emergency repair call out service 0800 772 3636

A running toilet is a common problem that many homeowners face, and it can waste a significant amount of water if not addressed promptly. Fortunately, fixing a running toilet is a relatively simple and straightforward process that can be done by most homeowners with the right tools and knowledge. In this article, we’ll provide a step-by-step guide on how to fix a running toilet and prevent it from wasting water.

Step 1: Identify the Problem

Before you can fix a running toilet, you need to identify the source of the problem. In most cases, a running toilet is caused by a faulty flapper valve, which is the rubber flap that covers the opening at the bottom of the tank. When the flapper valve is worn or damaged, it can allow water to continuously flow from the tank into the bowl, causing the toilet to run.

Step 2: Turn Off the Water Supply

To fix a running toilet, you’ll need to turn off the water supply to the toilet. Locate the water shut-off valve, which is usually located behind the toilet or in a nearby closet, and turn it off by turning the valve clockwise.

Step 3: Drain the Tank

Once the water supply is turned off, flush the toilet to drain the tank completely. This will allow you to work on the toilet without getting wet.

Step 4: Inspect the Flapper Valve

Remove the lid from the toilet tank and inspect the flapper valve. Look for signs of wear or damage, such as cracks or tears, which can prevent the valve from sealing properly. If the flapper valve is damaged, it will need to be replaced.

Step 5: Replace the Flapper Valve

To replace the flapper valve, turn off the water supply to the toilet and flush the tank to drain the water. Then, disconnect the chain that connects the flapper valve to the flush lever and remove the valve from the overflow tube. Install the new flapper valve in the same position as the old one and reconnect the chain to the flush lever.

Step 6: Adjust the Chain Length

If the chain connecting the flapper valve to the flush lever is too long or too short, it can prevent the valve from sealing properly. Adjust the chain length so that there is a slight amount of slack, but not enough to prevent the valve from closing fully.

Step 7: Turn the Water Supply Back On

Once you’ve replaced the flapper valve and adjusted the chain length, turn the water supply back on and allow the tank to fill with water. Flush the toilet a few times to ensure that the valve is working properly and that the toilet is no longer running.

Step 8: Call a Professional

If these steps do not solve the problem or you are uncomfortable attempting to fix the issue on your own, it may be time to call a professional plumber. A plumber can diagnose the problem and make any necessary repairs or replacements.

Why hiring a professional plumber is better than doing it on your own?

While there are certainly some plumbing issues that can be easily resolved with a little DIY effort, there are many situations where hiring a professional plumber like Need a Plumber Near Me is the best course of action. Here are a few reasons why it’s often better to call in a professional rather than attempt to fix a plumbing issue on your own:

  1. Experience and Expertise: Professional plumbers have years of training and experience in dealing with a wide range of plumbing issues. They have the knowledge and expertise to diagnose the problem quickly and accurately, and to develop the most effective solution. Attempting to fix a plumbing problem on your own can be risky if you lack the necessary experience and knowledge.
  2. Proper Tools and Equipment: Professional plumbers have access to a range of specialised tools and equipment that are necessary to properly diagnose and repair plumbing issues. Without the right tools and equipment, attempting to fix a plumbing issue on your own can be difficult or even dangerous.
  3. Time and Convenience: Fixing a plumbing issue can take a significant amount of time, especially if you are not familiar with the process. By hiring a professional plumber, you can save yourself the time and hassle of trying to fix the problem on your own. Plumbers can often complete repairs quickly and efficiently, allowing you to get back to your normal routine as soon as possible.
  4. Cost-Effective: While it may seem like hiring a professional plumber would be more expensive than attempting to fix the issue on your own, the opposite is often true. Plumbers have access to wholesale pricing on parts and equipment, and they can often identify more cost-effective solutions to plumbing problems than the average homeowner.
  5. Safety: Plumbing systems can be complex and dangerous, especially if you are not familiar with how they work. Attempting to fix a plumbing issue on your own can put you at risk of injury. Professional plumbers are trained in safety procedures and have the necessary safety equipment to protect themselves and others while working on your plumbing system.
  6. Warranty and Insurance: Most professional plumbers offer a warranty on their work, meaning that if something goes wrong with the repair, they will come back and fix it at no additional cost to you. In addition, professional plumbers are insured, meaning that if something goes wrong during the repair process and damages your property, their insurance will cover the cost of the repairs.
  7. Compliance with Regulations: Plumbing work is subject to various regulations and codes that must be followed to ensure that the work is safe and up to standard. Professional plumbers are familiar with these regulations and codes and can ensure that any repairs or installations are done in compliance with them.
  8. Prevention of Future Issues: Professional plumbers not only fix the immediate issue but can also identify potential problems and offer solutions to prevent them from occurring in the future. This can save you money and headaches down the line.

While it can be tempting to try to fix a plumbing issue on your own, hiring a professional plumber is often the better choice. With their experience, expertise, specialised tools and equipment, and cost-effective solutions, professional plumbers can help ensure that your plumbing issues are resolved quickly, safely, and effectively.

In summary, fixing a running toilet is a simple process that can be done by most homeowners with the right tools and knowledge. However, if you’re not comfortable doing this yourself, don’t hesitate to contact a professional plumber. Need a Plumber Near Me provides a wide range of plumbing services, including toilet repairs. Their licensed and experienced plumbers can help ensure that your toilet is in good working order and provide expert advice on how to prevent it from running in the future. Don’t hesitate to contact us for your plumbing needs!

timeline

Make Appointment

Plumbing emergencies can happen at any time, which is why we offer a 24/7 emergency service.

timeline

We Arrive Within 1 Hour

Whether it's a leaky faucet, a broken toilet, or a flooded basement, our team of experts is always ready to respond and get the job done right.

timeline

Solve Your Problem

Our goal is to provide you with top-notch plumbing services that you can trust and rely on.

Need A Plumber Near Me

Saving your money with efficient plumbing technologies

We are committed to using only the best products and materials to ensure the longevity of our work, and we take pride in the quality of our tradesmanship